Contact: WANG
Mobile: +86-138 0199 7980
Email: klaus@jnewtech.com
Address: BoYang Road No.16, Building23-A-207
Slope Optical Path Length System
- Hightlight:
- CCD Spectrometer
- +Xenon Light Source
- Weak UV signal Detection
- Good Performance
For Email Quatation
klaus@jnewtech.com
- Introduction
Unlike the single value dependence of legacy UV-Vis methods, the data-dense slope method characterizes samples by collecting multiple absorbance data points at several pathlengths to create a section curve (absorbance vs. pathlength plot).
The section curve is then analyzed in real time to verify linearity in compliance with the Beer-Lambert law. The linear region of the section curve is directly proportional to the concentration of the sample based upon the sample extinction coefficient.
UVS5 CCD Ultraviolet System
It integrates a CCD spectrometer and xenon light source to achieve a good performance in UV.
CCD spectrometer best for weak signal
Integrated a xenon light source
CCD from JPN,
Hardware from USA/GER
1.ntegrated ultraviolet SystemIt provides a turnkey solution to combine a CCDspectrometer with a xenon light source.
2.Suitable for weak UV measurementHigh performance Xenon, low noise CcD spectrometer make it suitable for Uy measurement.
3.Easy to useReduce complexity of system, make it a betterUV solution.
UVS5 Family highlights
CCD detector good performance in UV
High sensitivity in UV region compare to CMOS
Wavelength range 180-500nm,200-400nm
Signal to noise ratio 1600:1 *snr-(Signal-Noise)/Devication
Integrated a Xenon light source
Reduce the system complexity
Suitable for weak spectral signal detection
Extended SDK supported
SMA905 optical interface
Full of accessory for UVS5 system
USB interface
- Previous: UV Concentration System
- Next: UV Absorption System
Contact
Hotline
+86-138 0199 7980
Office hour
Monday to Saturday
Company Phone
13801997980
QR Code
